Skip Headers
Oracle® Database PL/SQL Packages and Types Reference
10g Release 2 (10.2)

Part Number B14258-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

109 DBMS_STREAMS_TABLESPACE_ADM

The DBMS_STREAMS_TABLESPACE_ADM package, one of a set of Streams packages, provides administrative interfaces for copying tablespaces between databases and moving tablespaces from one database to another. This package uses transportable tablespaces, Data Pump, the DBMS_FILE_TRANSFER package, and the DBMS_FILE_GROUP package.

See Also:

Oracle Streams Concepts and Administration and Oracle Streams Replication Administrator's Guide for more information about this package and Streams

This chapter contains the following topics:


Using DBMS_STREAMS_TABLESPACE_ADM

This section contains topics which relate to using the DBMS_STREAMS_TABLESPACE_ADM package.


Overview

Either a simple tablespace or a self-contained tablespace set must be specified in each procedure in this package.

A self-contained tablespace has no references from the tablespace pointing outside of the tablespace. For example, if an index in the tablespace is for a table in a different tablespace, then the tablespace is not self-contained. A simple tablespace is a self-contained tablespace that uses only one datafile.

A simple tablespace must be specified in the following procedures:

A self-contained tablespace set has no references from inside the set of tablespaces pointing outside of the set of tablespaces. For example, if a partitioned table is partially contained in the set of tablespaces, then the set of tablespaces is not self-contained.

A self-contained tablespace set must be specified in the following procedures:

To determine whether a set of tablespaces is self-contained, use the TRANSPORT_SET_CHECK procedure in the Oracle supplied package DBMS_TTS.

See Also:

Oracle Database Administrator's Guide for more information about self-contained tablespaces and tablespace sets

Types

This package contains the PL/SQL types listed in Table 109-1.

Table 109-1 DBMS_STREAMS_TABLESPACE_ADM Types

Type Description
DIRECTORY_OBJECT_SET Type
Contains the names of one or more directory objects
FILE Type
Contains the directory object associated with a directory and the name of the file in the directory
FILE_SET Type
Contains one or more files
TABLESPACE_SET Type
Contains the names of one or more tablespaces

DIRECTORY_OBJECT_SET Type

Contains the names of one or more directory objects. Each name must be a directory object created using the SQL statement CREATE DIRECTORY.

Syntax
TYPE DIRECTORY_OBJECT_SET IS TABLE OF VARCHAR2(32) 
  INDEX BY BINARY_INTEGER;

FILE Type

Contains the directory object associated with a directory and the name of the file in the directory.

Syntax
TYPE FILE IS RECORD(
   directory_object VARCHAR2(32),
   file_name        VARCHAR2(4000));

Attributes

Table 109-2 FILE Attributes

Attribute Description
directory_object The name of a directory object. You must specify the name of a directory object created using the SQL statement CREATE DIRECTORY.
file_name The name of the file in the corresponding directory associated with the directory object


FILE_SET Type

Contains one or more files.

Syntax
TYPE FILE_SET IS TABLE OF FILE 
   INDEX BY BINARY_INTEGER;

TABLESPACE_SET Type

Contains the names of one or more tablespaces.

Syntax
TYPE TABLESPACE_SET IS TABLE OF VARCHAR2(32) 
   INDEX BY BINARY_INTEGER;


Summary of DBMS_STREAMS_TABLESPACE_ADM Subprograms

Table 109-3 DBMS_STREAMS_TABLESPACE_ADM Package Subprograms

Subprogram Description
ATTACH_SIMPLE_TABLESPACE Procedure
Uses Data Pump to import a simple tablespace previously exported using the DBMS_STREAMS_TABLESPACE_ADM package or Data Pump export
ATTACH_TABLESPACES Procedure
Uses Data Pump to import a self-contained tablespace set previously exported using the DBMS_STREAMS_TABLESPACE_ADM package, Data Pump export, or the Recovery Manager (RMAN) TRANSPORT TABLESPACE command
CLONE_SIMPLE_TABLESPACE Procedure
Clones a simple tablespace. The tablespace can later be attached to a database.
CLONE_TABLESPACES Procedure
Clones a set of self-contained tablespaces. The tablespaces can later be attached to a database.
DETACH_SIMPLE_TABLESPACE Procedure
Detaches a simple tablespace. The tablespace can later be attached to a database.
DETACH_TABLESPACES Procedure
Detaches a set of self-contained tablespaces. The tablespaces can later be attached to a database.
PULL_SIMPLE_TABLESPACE Procedure
Copies a simple tablespace from a remote database and attaches it to the current database
PULL_TABLESPACES Procedure
Copies a set of self-contained tablespaces from a remote database and attaches the tablespaces to the current database

Note:

All subprograms commit unless specified otherwise.

ATTACH_SIMPLE_TABLESPACE Procedure

This procedure uses Data Pump to import a simple tablespace previously exported using the DBMS_STREAMS_TABLESPACE_ADM package, Data Pump export, or the Recovery Manager (RMAN) TRANSPORT TABLESPACE command.

Syntax

DBMS_STREAMS_TABLESPACE_ADM.ATTACH_SIMPLE_TABLESPACE(
   directory_object      IN  VARCHAR2,
   tablespace_file_name  IN  VARCHAR2,
   converted_file_name   IN  VARCHAR2  DEFAULT NULL,
   datafile_platform     IN  VARCHAR2  DEFAULT NULL,
   tablespace_name       OUT VARCHAR2);

Parameters

Table 109-4 ATTACH_SIMPLE_TABLESPACE Procedure Parameters

Parameter Description
directory_object The directory that contains the Data Pump dump file and the datafile for the tablespace. You must specify the name of a directory object created using the SQL statement CREATE DIRECTORY.

The name of the Data Pump export dump file must be the same as the datafile name for the tablespace, except with a .dmp extension. If the converted_file_name is non-NULL, specify the dump file produced by the export database, not the file name after conversion.

The Data Pump import log file is written to this directory. The name of the log file is the same as the datafile name for the tablespace, except with an .alg extension. If a file already exists with the same name as the log file in the directory, then the procedure overwrites the file.

If NULL, then the procedure raises an error.

tablespace_file_name The name of the datafile for the tablespace being imported.

If NULL, then the procedure raises an error.

converted_file_name If the datafile_platform parameter is non-NULL and is not the same as the platform of the local import database, then specify a file name for the converted datafile. The datafile is converted to the platform of the local import database and copied to the new file name. The existing datafile is not modified nor deleted.

If non-NULL and the datafile_platform parameter is NULL, then the procedure ignores this parameter.

If non-NULL and the datafile_platform parameter specifies the same platform as the local import database, then the procedure ignores this parameter.

If NULL and the datafile_platform parameter is non-NULL, then the procedure raises an error.

datafile_platform Specify NULL if the platform is the same for the export database and the current import database.

Specify the platform for the export database if the platform is different for the export database and the import database.

You can determine the platform of a database by querying the PLATFORM_NAME column in the V$DATABASE dynamic performance view. The V$TRANSPORTABLE_PLATFORM dynamic performance view lists all platforms that support cross-platform transportable tablespaces.

tablespace_name Contains the name of the attached tablespace. The attached tablespace is read-only. Use an ALTER TABLESPACE statement to make the tablespace read/write if necessary.

Usage Notes

To run this procedure, a user must meet the following requirements:

Automatic Storage Management (ASM) directories cannot be used with this procedure.

See Also:

Overview

ATTACH_TABLESPACES Procedure

This procedure uses Data Pump to import a self-contained tablespace set previously exported using the DBMS_STREAMS_TABLESPACE_ADM package, Data Pump export, or the Recovery Manager (RMAN) TRANSPORT TABLESPACE command.

This procedure is overloaded and consists of the following versions:

Syntax

DBMS_STREAMS_TABLESPACE_ADM.ATTACH_TABLESPACES(
   datapump_job_name          IN OUT VARCHAR2,
   dump_file                  IN     FILE,
   tablespace_files           IN     FILE_SET,
   converted_files            IN     FILE_SET,
   datafiles_platform         IN     VARCHAR2  DEFAULT NULL,
   log_file                   IN     FILE      DEFAULT NULL,
   tablespace_names           OUT    TABLESPACE_SET);

DBMS_STREAMS_TABLESPACE_ADM.ATTACH_TABLESPACES(
   file_group_name            IN   VARCHAR2,
   version_name               IN   VARCHAR2  DEFAULT NULL,
   datafiles_directory_object IN   VARCHAR2  DEFAULT NULL,
   logfile_directory_object   IN   VARCHAR2  DEFAULT NULL,
   repository_db_link         IN   VARCHAR2  DEFAULT NULL,
   tablespace_names           OUT  TABLESPACE_SET);

Parameters

Table 109-5 ATTACH_TABLESPACES Procedure Parameters

Parameter Description
data_pump_job_name The Data Pump job name. Specify a Data Pump job name if you want to adhere to naming conventions or if you want to track the job more easily.

If NULL, then the system generates a Data Pump job name.

dump_file The file name of the Data Pump dump file to import.

If NULL or if a file attribute is NULL, then the procedure raises an error.

tablespace_files The file set that contains the datafiles for the tablespace set being imported.

If NULL, then the procedure raises an error.

converted_files If the datafiles_platform parameter is non-NULL and is not the same as the platform for the local import database, then specify a file set with the names of the converted datafiles. The datafiles are converted to the platform of the local import database and copied to the new file names. In this case, the number of files in the specified file set must match the number of files in the file set specified for the tablespace_files parameter. The existing datafiles are not modified nor deleted.

If non-NULL and the datafiles_platform parameter is NULL, then the procedure ignores this parameter.

If non-NULL and the datafiles_platform parameter specifies the same platform as the local import database, then the procedure ignores this parameter.

If NULL and the datafiles_platform parameter is non-NULL, then the procedure raises an error.

datafiles_platform Specify NULL if the platform is the same for the export database and the current import database.

Specify the platform for the export database if the platform is different for the export database and the import database.

You can determine the platform of a database by querying the PLATFORM_NAME column in the V$DATABASE dynamic performance view. The V$TRANSPORTABLE_PLATFORM dynamic performance view lists all platforms that support cross-platform transportable tablespaces.

log_file Specify the log file name for the Data Pump import.

If NULL or if at least one file parameter is NULL, then the system generates a log file name with the extension .alg and places it in the Data Pump export dump file directory.

If a file already exists with the same name as the log file in the directory, then the procedure overwrites the file.

file_group_name The name of the file group, specified as [schema_name.]file_group_name. For example, if the schema is hq_dba and the file group name is sales, then specify hq_dba.sales. If the schema is not specified, then the current user is the default.
version_name The name of the file group version to attach.

If NULL, then the procedure uses the version with the latest creation time for the file group.

datafiles_directory_object The directory object into which the datafiles and Data Pump export dump file are copied. The files are copied from the tablespace repository directories to this directory.

If non-NULL, the attached tablespaces use the files in specified directory. However, the file group version specified in the version_name parameter consists of the files in the original directory, not in the directory specified by this datafiles_directory_object parameter.

If NULL, then the procedure does not copy the datafiles and dump file.

logfile_directory_object The directory object into which the Data Pump import log file is placed. The system generates a log file name with the extension .alg.

If NULL, then the procedure places the import log file in the same directory as the dump file.

repository_db_link If the file group is in a different database, then specify the name of the database link to the database that contains the file group. The database link must be accessible to the user who runs the procedure.

If this parameter is non-NULL, then meet the following requirements:

  • Each directory object that contains files in the version being attached must exist on both databases.

  • The corresponding directory objects must have the same names on both databases.

If NULL, then the procedure does not use a database link, and the procedure uses the file group in the local database.

tablespace_names Contains the names of the attached tablespaces. The attached tablespaces are read-only. Use ALTER TABLESPACE statements to make the tablespaces read/write if necessary.

Usage Notes

The following sections contain usage notes for this procedure:

User Requirements

To run either version of this procedure, a user must meet the following requirements:

If the Data Pump job version of the procedure is run, then the user must have WRITE privilege on the directory objects that will hold the converted datafiles for the tablespaces in the set if platform conversion is necessary. These directory objects are specified by the converted_files parameter if it is non-NULL.

If the file group version of the procedure is run, then the user must have the necessary privileges to manage the file group.

Procedures Used to Clone or Detach a Tablespace Set

After a tablespace set is cloned or detached using the CLONE_TABLESPACES or DETACH_TABLEPSACES procedure, respectively, the tablespace set can be attached to a database using the ATTACH_TABLESPACES procedure. If the Data Pump job version of the CLONE_TABLESPACES or DETACH_TABLEPSACES procedure was used, then use the Data Pump job version of the ATTACH_TABLESPACES procedure. If the file group version of the CLONE_TABLESPACES or DETACH_TABLEPSACES procedure was used, then use the file group version of the ATTACH_TABLESPACES procedure.

When the Attach Database Is Different Than the Clone or Detach Database

You can attach a tablespace set to a different database than the database from which the tablespace set was cloned or detached. The two databases might or might not share a file system. If the two databases do not share a file system, then you must transfer the dump file and datafiles to the remote system using the DBMS_FILE_TRANSFER package, FTP, or some other method. You can attach the tablespace set in one of the following ways depending on the version of the ATTACH_TABLESPACES procedure you use:

Automatic Storage Management Directories

Automatic Storage Management (ASM) directories can be specified for the directory objects that store data files and export dump files, but ASM directories cannot be specified for directory objects that store log files.

See Also:

Oracle Database Utilities for information about specifying ASM directories for directory objects

CLONE_SIMPLE_TABLESPACE Procedure

This procedure clones a simple tablespace. The specified tablespace must be online.

Specifically, this procedure performs the following actions:

  1. Makes the specified tablespace read-only if it is not read-only

  2. Uses Data Pump to export the metadata for the tablespace and places the dump file in the specified directory

  3. Places the datafile for the specified tablespace in the specified directory

  4. If this procedure made the tablespace read-only, then makes the tablespace read/write

In addition, this procedure optionally can create a datafile for the tablespace that can be used with a platform that is different than the local database platform.

Syntax

DBMS_STREAMS_TABLESPACE_ADM.CLONE_SIMPLE_TABLESPACE(
   tablespace_name      IN  VARCHAR2,
   directory_object     IN  VARCHAR2,
   destination_platform IN  VARCHAR2  DEFAULT NULL,
   tablespace_file_name OUT VARCHAR2);

Parameters

Table 109-6 CLONE_SIMPLE_TABLESPACE Procedure Parameters

Parameter Description
tablespace_name The tablespace to be cloned.

If NULL, then the procedure raises an error.

directory_object The directory where the Data Pump export dump file, the Data Pump export log file, and the datafile for the tablespace are placed. You must specify the name of a directory object created using the SQL statement CREATE DIRECTORY.

The name of the Data Pump export dump file is the same as the datafile name for the tablespace, except with a .dmp extension. If a file already exists with the same name as the dump file in the directory, then the procedure raises an error.

The name of the log file is the same as the datafile name for the tablespace, except with a .clg extension. If a file already exists with the same name as the log file in the directory, then the procedure overwrites the file.

If NULL, then the procedure raises an error.

destination_platform Specify NULL if the platform is the same for the current export database and the intended import database.

Specify the platform for the intended import database if the platform is different for the export database and the import database.

You can determine the platform of a database by querying the PLATFORM_NAME column in the V$DATABASE dynamic performance view. The V$TRANSPORTABLE_PLATFORM dynamic performance view lists all platforms that support cross-platform transportable tablespaces.

tablespace_file_name Contains the name of the cloned tablespace datafile. This datafile is placed in the directory specified by the parameter directory_object.

Usage Notes

To run this procedure, a user must meet the following requirements:

After cloning a tablespace using this procedure, you can add the tablespace to a different database using the ATTACH_SIMPLE_TABLESPACE procedure. If the database is a remote database and you want to use the ATTACH_SIMPLE_TABLESPACE procedure, then you can transfer the dump file and datafile to the remote system using the DBMS_FILE_TRANSFER package, FTP, or some other method.

Automatic Storage Management (ASM) directories cannot be used with this procedure.


CLONE_TABLESPACES Procedure

This procedure clones a set of self-contained tablespaces. All of the tablespaces in the specified tablespace set must be online.

Specifically, this procedure performs the following actions:

  1. Makes any read/write tablespace in the specified tablespace set read-only

  2. Uses Data Pump to export the metadata for the tablespaces in the tablespace set and places the dump file in the specified directory

  3. Places the datafiles that comprise the specified tablespace set in the specified directory

  4. If this procedure made a tablespace read-only, then makes the tablespace read/write

This procedure is overloaded and consists of the following versions:

Syntax

DBMS_STREAMS_TABLESPACE_ADM.CLONE_TABLESPACES(
   datapump_job_name            IN OUT VARCHAR2,
   tablespace_names             IN     TABLESPACE_SET,
   dump_file                    IN     FILE,
   tablespace_directory_objects IN     DIRECTORY_OBJECT_SET,
   destination_platform         IN     VARCHAR2  DEFAULT NULL,
   log_file                     IN     FILE      DEFAULT NULL,
   tablespace_files             OUT    FILE_SET);

DBMS_STREAMS_TABLESPACE_ADM.CLONE_TABLESPACES(
   tablespace_names             IN  TABLESPACE_SET,
   tablespace_directory_object  IN  VARCHAR2  DEFAULT NULL,
   log_file_directory_object    IN  VARCHAR2  DEFAULT NULL,
   file_group_name              IN  VARCHAR2,
   version_name                 IN  VARCHAR2  DEFAULT NULL,
   repository_db_link           IN  VARCHAR2  DEFAULT NULL);

Parameters

Table 109-7 CLONE_TABLESPACES Procedure Parameters

Parameter Description
data_pump_job_name The Data Pump job name. Specify a Data Pump job name if you want to adhere to naming conventions or if you want to track the job more easily.

If NULL, then the system generates a Data Pump job name.

tablespace_names The tablespace set to be cloned.

If NULL, then the procedure raises an error.

dump_file The file name of the Data Pump dump file that is exported.

If NULL or if a file attribute is NULL, then the procedure raises an error.

If the specified file already exists, then the procedure raises an error.

tablespace_directory_objects The set of directory objects into which the datafiles for the tablespaces are copied. If more than one directory object is in the set, then the procedure copies a datafile to each directory object in the set in sequence. In this case, if the end of the directory object set is reached, then datafile copying starts again with the first directory object in the set.

If NULL, then the procedure copies datafiles for the tablespace set to the dump file directory.

destination_platform Specify NULL if the platform is the same for the current export database and the intended import database.

Specify the platform for the intended import database if the platform is different for the export database and the import database.

You can determine the platform of a database by querying the PLATFORM_NAME column in the V$DATABASE dynamic performance view. The V$TRANSPORTABLE_PLATFORM dynamic performance view lists all platforms that support cross-platform transportable tablespaces.

log_file Specify the log file name for the Data Pump export.

If NULL or if at least one file parameter is NULL, then the system generates a log file name with the extension .clg and places it in the dump file directory.

If a file already exists with the same name as the log file in the directory, then the procedure overwrites the file.

tablespace_directory_object The directory object into which the datafiles are copied and Data Pump export dump file is placed. The system generates a dump file name with the extension .dmp.

If NULL, then the procedure copies the datafiles to and places the dump file in the default directory object for the version. If the version does not have a default directory object, then the procedure uses the default directory object for the file group.

If NULL and no default directory object exists for the version or file group, then the procedure raises an error.

log_file_directory_object The directory object into which the Data Pump export log file is placed. The system generates a log file name with the extension .clg.

If NULL, then the procedure uses the directory object specified in tablespace_directory_object.

file_group_name The name of the file group, specified as [schema_name.]file_group_name. For example, if the schema is hq_dba and the file group name is sales, then specify hq_dba.sales. If the schema is not specified, then the current user is the default.

If the specified file group does not exist, then the procedure creates it.

version_name The name of the version into which the cloned tablespace set is placed. The specified version name cannot be a positive integer.

If the specified version does not exist, then the procedure creates it.

If the specified version exists, then the procedure adds the tablespace set to the version. Only one Data Pump export dump file can exist in a version.

If NULL, then the procedure creates a new version, and the version number can be used to manage the version.

repository_db_link If the file group is in a remote database, then specify the name of the database link to the database that contains the file group. The database link must be accessible to the user who runs the procedure.

If this parameter is non-NULL, then the directory object specified in tablespace_directory_object must exist on the local database and on the remote database. If tablespace_directory_object is NULL, then the default directory object must exist on both databases. The directory object must have the same name on each database and must correspond to the same directory on a shared file system.

If NULL, then the procedure does not use a database link, and the procedure uses the file group in the local database.

tablespace_files Contains the datafiles for the cloned tablespace set. These datafiles are placed in the directories specified by the directory objects in the parameter tablespace_directory_objects.

Usage Notes

To run either version of this procedure, a user must meet the following requirements:

If the file group version of the procedure is run, then the user must have the necessary privileges to manage the file group.

Automatic Storage Management (ASM) directories can be specified for the directory objects that store data files and export dump files, but ASM directories cannot be specified for directory objects that store log files.

After cloning a tablespace set using this procedure, you can attach the tablespaces to a different database using the ATTACH_TABLESPACES procedure.


DETACH_SIMPLE_TABLESPACE Procedure

This procedure detaches a simple tablespace. The specified tablespace must be online.

Specifically, this procedure performs the following actions:

  1. Makes the specified tablespace read-only if it is not read-only

  2. Uses Data Pump to export the metadata for the tablespace and places the dump file in the directory that contains the tablespace datafile

  3. Drops the tablespace and its contents from the database

Syntax

DBMS_STREAMS_TABLESPACE_ADM.DETACH_SIMPLE_TABLESPACE(
   tablespace_name       IN  VARCHAR2,
   directory_object      OUT VARCHAR2,
   tablespace_file_name  OUT VARCHAR2);

Parameters

Table 109-8 DETACH_SIMPLE_TABLESPACE Procedure Parameters

Parameter Description
data_pump_job_name The Data Pump job name. Specify a Data Pump job name if you want to adhere to naming conventions or if you want to track the job more easily.

If NULL, then the system generates a Data Pump job name.

directory_object Contains the directory where the Data Pump export dump file and the Data Pump export log file are placed. The procedure uses the directory of the datafile for the tablespace. Therefore, make sure a directory object created using the SQL statement CREATE DIRECTORY exists for this directory.

The name of the Data Pump export dump file is the same as the datafile name for the tablespace, except with a .dmp extension. If a file already exists with the same name as the dump file in the directory, then the procedure raises an error.

The name of the log file is the same as the datafile name for the tablespace, except with a .dlg extension. If a file already exists with the same name as the log file in the directory, then the procedure overwrites the file.

tablespace_file_name Contains the name of the detached tablespace datafile.

Usage Notes

To run this procedure, a user must meet the following requirements:

After detaching a tablespace using this procedure, you can add the tablespace to a different database using the ATTACH_SIMPLE_TABLESPACE procedure. If the database is a remote database and you want to use the ATTACH_SIMPLE_TABLESPACE procedure, then you can transfer the dump file and datafile to the remote system using the DBMS_FILE_TRANSFER package, FTP, or some other method. You can use the two OUT parameters in this procedure to accomplish the attach or pull operation.

Automatic Storage Management (ASM) directories cannot be used with this procedure.

Note:

Do not use the DETACH_SIMPLE_TABLESPACE procedure on a tablespace if the tablespace is using the Oracle-managed files feature. If you do, then the datafile for the tablespace is dropped automatically when the tablespace is dropped.

See Also:


DETACH_TABLESPACES Procedure

This procedure detaches a set of self-contained tablespaces. All of the tablespaces in the specified tablespace set must be online and any table partitions must not span tablespaces in the tablespace set.

Specifically, this procedure performs the following actions:

  1. Makes any read/write tablespace in the specified tablespace set read-only

  2. Uses Data Pump to export the metadata for the tablespace set and places the dump file in the specified directory

  3. Drops the tablespaces in the specified tablespace set and their contents from the database

This procedure does not move or copy the datafiles that comprise the specified tablespace set.

This procedure is overloaded and consists of the following versions:

Note:

Do not use the DETACH_TABLESPACES procedure if any of the tablespaces in the tablespace set are using the Oracle-managed files feature. If you do, then the datafiles for these tablespaces are dropped automatically when the tablespaces are dropped.

Syntax

DBMS_STREAMS_TABLESPACE_ADM.DETACH_TABLESPACES(
   datapump_job_name         IN OUT VARCHAR2,
   tablespace_names          IN     TABLESPACE_SET,
   dump_file                 IN     FILE,
   log_file                  IN     FILE  DEFAULT NULL,
   tablespace_files          OUT    FILE_SET);

DBMS_STREAMS_TABLESPACE_ADM.DETACH_TABLESPACES(
   tablespace_names          IN TABLESPACE_SET,
   export_directory_object   IN VARCHAR2  DEFAULT NULL,
   log_file_directory_object IN VARCHAR2  DEFAULT NULL,
   file_group_name           IN VARCHAR2,
   version_name              IN VARCHAR2  DEFAULT NULL,
   repository_db_link        IN VARCHAR2  DEFAULT NULL);

Parameters

Table 109-9 DETACH_TABLESPACES Procedure Parameters

Parameter Description
data_pump_job_name The Data Pump job name. Specify a Data Pump job name if you want to adhere to naming conventions or if you want to track the job more easily.

If NULL, then the system generates a Data Pump job name.

tablespace_names The tablespace set to be detached.

If NULL, then the procedure raises an error.

dump_file The file name of the Data Pump dump file that is exported.

If NULL or if a file attribute is NULL, then the procedure raises an error.

If the specified file already exists, then the procedure raises an error.

log_file Specify the log file name for the Data Pump export.

If NULL or if at least one file parameter is NULL, then the system generates a log file name with the extension .dlg and places it in the dump file directory.

If a file already exists with the same name as the log file in the directory, then the procedure overwrites the file.

tablespace_files Contains the names of the datafiles for the detached tablespace set.
export_directory_object The directory object into which the Data Pump export dump file is placed. The system generates a dump file name with the extension .dmp.

If NULL, then procedure places the dump file in the default directory object for the version. If the version does not have a default directory object, then the procedure uses the default directory object for the file group.

If NULL and no default directory object exists for the version or file group, then the procedure raises an error.

log_file_directory_object The directory object into which the Data Pump export log file is placed. The system generates a log file name with the extension .dlg.

If NULL, then the procedure places the export log file in the same directory as the export dump file.

file_group_name The name of the file group, specified as [schema_name.]file_group_name. For example, if the schema is hq_dba and the file group name is sales, then specify hq_dba.sales. If the schema is not specified, then the current user is the default.

If the specified file group does not exist, then the procedure creates it.

version_name The name of the version into which the detached tablespace set is placed. The specified version name cannot be a positive integer.

If the specified version does not exist, then the procedure creates it.

If the specified version exists, then procedure adds the tablespace set to the version. Only one Data Pump export dump file can exist in a version.

If NULL, then the procedure creates a new version, and the version number can be used to manage the version.

repository_db_link If the file group is in a remote database, then specify the name of the database link to the database that contains the file group. The database link must be accessible to the user who runs the procedure.

If this parameter is non-NULL, then the directory object specified in export_directory_object must exist on the local database and on the remote database. If export_directory_object is NULL, then the default directory object must exist on both databases. The directory object must have the same name on each database and must correspond to the same directory on a shared file system.

If NULL, then the procedure does not use a database link, and the procedure uses the file group in the local database.


Usage Notes

To run this either version of this procedure, a user must meet the following requirements:

If the file group version of the procedure is run, then the user must have the necessary privileges to manage the file group.

Automatic Storage Management (ASM) directories can be specified for the directory objects that store data files and export dump files, but ASM directories cannot be specified for directory objects that store log files.

After detaching a tablespace set using this procedure, you can attach the tablespaces to a different database using the ATTACH_TABLESPACES procedure.

See Also:


PULL_SIMPLE_TABLESPACE Procedure

This procedure copies a simple tablespace from a remote database and attaches it to the current database. The specified tablespace at the remote database must be online.

Specifically, this procedure performs the following actions:

  1. Makes the specified tablespace read-only at the remote database if it is not read-only

  2. Uses Data Pump to export the metadata for the tablespace

  3. Uses a database link and the DBMS_FILE_TRANSFER package to transfer the datafile for the tablespace and the log file for the Data Pump export to the current database

  4. Places the datafile for the specified tablespace and the log file for the Data Pump export in the specified directory at the local database

  5. If this procedure made the tablespace read-only, then makes the tablespace read/write

  6. Uses Data Pump to import the metadata for the tablespace in the at the local database

In addition, this procedure optionally can create a datafile for the tablespace that can be used with the local platform, if the platform at the remote database is different than the local database platform.

Syntax

DBMS_STREAMS_TABLESPACE_ADM.PULL_SIMPLE_TABLESPACE(
   tablespace_name      IN VARCHAR2,
   database_link        IN VARCHAR2,
   directory_object     IN VARCHAR2  DEFAULT NULL,
   conversion_extension IN VARCHAR2  DEFAULT NULL);

Parameters

Table 109-10 PULL_SIMPLE_TABLESPACE Procedure Parameters

Parameter Description
tablespace_name The tablespace to be pulled.

If NULL, then the procedure raises an error.

database_link The name of the database link to the database that contains the tablespace to pull. The database link must be accessible to the user who runs the procedure.

If NULL, then the procedure raises an error.

directory_object The directory object to which the datafile for the tablespace is copied on the local database. You must specify the name of a directory object created using the SQL statement CREATE DIRECTORY.

The Data Pump import log file is written to this directory. The name of the log file is the same as the datafile name for the tablespace, except with a .plg extension. If a file already exists with the same name as the log file in the directory, then the procedure overwrites the file.

If NULL, then the procedure raises an error.

conversion_extension Specify NULL if the platform is the same for the remote export database and the current import database.

If the platform is different for the export database and the import database, then specify an extension for the tablespace datafile that is different than the extension for the tablespace datafile at the remote database. In this case, the procedure transfers the datafile to the import database and converts it to be compatible with the current import database platform automatically. After conversion is complete, the original datafile is deleted at the import database.


Usage Notes

To run this procedure, a user must meet the following requirements on the remote database:

To run this procedure, a user must meet the following requirements on the local database:

Automatic Storage Management (ASM) directories cannot be used with this procedure.

See Also:

Overview

PULL_TABLESPACES Procedure

This procedure copies a set of self-contained tablespaces from a remote database and attaches the tablespaces to the current database. All of the tablespaces in the specified tablespace set at the remote database must be online.

Specifically, this procedure performs the following actions:

  1. Makes any read/write tablespace in the specified tablespace set at the remote database read-only

  2. Uses Data Pump to export the metadata for the tablespaces in the tablespace set

  3. Uses a database link and the DBMS_FILE_TRANSFER package to transfer the datafiles for the tablespace set and the log file for the Data Pump export to the current database

  4. Places the datafiles that comprise the specified tablespace set in the specified directories at the local database

  5. Places the log file for the Data Pump export in the specified directory at the local database

  6. If this procedure made a tablespace read-only, then makes the tablespace read/write

  7. Uses Data Pump to import the metadata for the tablespaces in the tablespace set at the local database

In addition, this procedure optionally can create datafiles for the tablespace set that can be used with the local platform, if the platform at the remote database is different than the local database platform.

Syntax

DBMS_STREAMS_TABLESPACE_ADM.PULL_TABLESPACES(
   datapump_job_name            IN OUT VARCHAR2,
   database_link                IN     VARCHAR2,
   tablespace_names             IN     TABLESPACE_SET,
   tablespace_directory_objects IN     DIRECTORY_OBJECT_SET,
   log_file                     IN     FILE,
   conversion_extension         IN     VARCHAR2  DEFAULT NULL);

Parameters

Table 109-11 PULL_TABLESPACES Procedure Parameters

Parameter Description
data_pump_job_name The Data Pump job name. Specify a Data Pump job name if you want to adhere to naming conventions or if you want to track the job more easily.

If NULL, then the system generates a Data Pump job name.

database_link The name of the database link to the database that contains the tablespace set to pull. The database link must be accessible to the user who runs the procedure.

If NULL, then the procedure raises an error.

tablespace_names The tablespace set to be pulled.

If NULL, then the procedure raises an error.

tablespace_directory_objects The set of directory objects to which the datafiles for the tablespaces are copied. If more than one directory object is in the set, then the procedure copies a datafile to each directory object in the set in sequence. In this case, if the end of the directory object set is reached, then datafile copying starts again with the first directory object in the set.

If NULL, then the procedure raises an error.

log_file Specify the log file name for the Data Pump export.

If NULL or if at least one file parameter is NULL, then the system generates a log file name with the extension .plg and places it in one of the datafile directories.

If a file already exists with the same name as the log file in the directory, then the procedure overwrites the file.

conversion_extension Specify NULL if the platform is the same for the remote export database and the current import database.

If the platform is different for the export database and the import database, then specify an extension for the tablespace datafiles that is different than the extension for the tablespace datafiles at the remote database. In this case, the procedure transfers the datafiles to the import database and converts them to be compatible with the current import database platform automatically. After conversion is complete, the original datafiles are deleted at the import database.


Usage Notes

To run this procedure, a user must meet the following requirements on the remote database:

To run this procedure, a user must meet the following requirements on the local database:

Automatic Storage Management (ASM) directories can be specified for the directory objects that store data files and export dump files, but ASM directories cannot be specified for directory objects that store log files.

See Also:

Overview