Skip Headers
Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Installation Guide
10g Release 2 (10.2) for HP-UX

Part Number B14202-05
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

9 Understanding the Oracle Real Application Clusters Installed Configuration

This chapter describes the Oracle Real Application Clusters (RAC) installed configuration. The topics in this chapter include the following:

9.1 Understanding the Configured Environment in Oracle Real Application Clusters

Oracle Net Configuration Assistant (NETCA) and Database Configuration Assistant (DBCA) configure your environment to meet the requirements for database creation and Oracle Enterprise Manager discovery of Oracle Real Application Clusters databases.

Note:

Configuration files are created on each node in your cluster database.

9.2 Oracle Cluster Registry in Oracle Real Application Clusters

DBCA uses Oracle Cluster Registry (OCR) for storing the configurations for the cluster databases that it creates. The OCR is a shared file in a cluster file system environment. If you do not use a cluster file system, then you must make this file a shared raw device. Oracle Universal Installer (OUI) automatically initializes the OCR during the Oracle Clusterware installation.

9.3 Oratab Configuration for Oracle Real Application Clusters

Oracle creates an entry for each RAC database in the oratab configuration file. Oracle Enterprise Manager uses this file during service discovery to determine the name of the RAC database, and to determine if the database should be automatically started when the system is restarted. The database entry has the following syntax:

db_unique_name:$ORACLE_HOME:N

The variable db_unique_name is the database name for your RAC database, $ORACLE_HOME is the directory path to the database, and N indicates that the database should not be started at restart time. The following is an example entry for a database named db:

db:/private/system/db:N

Note:

Where the notation db_name appears in the previous example and throughout this chapter, it refers to the database name you entered when prompted by DBCA, or it refers to the entry you made for the DATABASE keyword of the CREATE DATABASE statement.

9.4 Database Components Created Using Database Configuration Assistant

This section describes the database components that DBCA creates, which include:

9.4.1 Tablespaces and Data files

For both single-instance and cluster database environments, an Oracle Database is divided into smaller logical areas of space known as tablespaces. Each tablespace corresponds to one or more data files stored on a disk. Table 9-1 shows the tablespace names used by a RAC database and the types of data they contain.

Table 9-1 Tablespace Names Used With Real Application Clusters Databases

Tablespace Name Contents

SYSTEM

Consists of the data dictionary, including definitions of tables, views, and stored procedures needed by the database. Oracle Database automatically maintains information in this tablespace.

SYSAUX

An auxiliary system tablespace that contains the DRSYS (contains data for OracleText), CWMLITE (contains the OLAP schemas), XDB (for XML features), ODM (for Oracle Data Mining), TOOLS (contains Enterprise Manager tables), INDEX, EXAMPLE, and OEM-REPO tablespaces.

USERS

Consists of application data. As you create and enter data into tables, Oracle Database fills this space with your data.

TEMP

Contains temporary tables and indexes created during SQL statement processing. You may need to expand this tablespace if you are running a SQL statement that involves significant sorting, such as ANALYZE COMPUTE STATISTICS on a very large table, or the constructs GROUP BY, ORDER BY, or DISTINCT.

UNDOTBSn

These are the undo tablespaces for each instance that DBCA creates for automatic undo management.

RBS

If you do not use automatic undo management, then Oracle Database uses the RBS tablespace for the rollback segments.


You cannot alter these tablespace names when using the preconfigured database configuration options from Oracle Universal Installer. However, you can change the names of the tablespaces if you use the advanced database creation method.

As mentioned, each tablespace has one or more data files. The data file names created by the preconfigured database configuration options vary by storage type such as ASM, OFS, raw devices, and so on.

You can specify different symbolic link names with the Advanced database configuration option.

9.4.2 Control Files

The database is configured with two control files that are stored on shared storage.

9.4.3 Redo Log Files

Each instance is configured with at least two redo log files that are stored in the shared storage. If you use a cluster file system, then these files are shared file system files. If you do not have a cluster file system, then these files are raw devices. If you use ASM, then these files are stored on the ASM disk group.

The file names of the redo log files that are created with the preconfigured database configuration options vary by storage type. You must enter the raw device names unless you are using a cluster file system.

When using raw devices, to use the advanced database creation method, locate the redo log files in the Database Storage page and replace their default filenames with the correct raw device names or symbolic link names.

9.5 Managing Undo Tablespaces in Real Application Clusters

Oracle Database stores rollback or undo information in undo tablespaces. To manage undo tablespaces, Oracle recommends that you use automatic undo management. Automatic undo management is an automated undo tablespace management mode that is easier to administer than manual undo management.

See Also:

Oracle Database Oracle Clusterware and Oracle Real Application Clusters Administration and Deployment Guide for more information about managing undo tablespaces

9.6 Initialization Parameter Files

Oracle recommends using the server parameter file (SPFILE). This file resides on the server on the shared disk; all instances in a cluster database can access this parameter file.

See Also:

Chapter 8, " Configuring the Server Parameter File in Oracle Real Application Clusters Environments" for more information about the creation and use of parameter files

9.7 Configuring Service Registration-Related Parameters in Real Application Clusters

Two key benefits of RAC are connection load balancing and failover. RAC extends the ability of single-instance Oracle Database load balancing, where connections are distributed among local dispatchers, to the balancing of connections among all instances in a cluster database. In addition, RAC provides failover by configuring multiple listeners on multiple nodes to manage client connection requests for the same database service. Connection load balancing and failover increase availability by taking advantage of the redundant resources within a cluster database. These features, however, require cross-instance registration.

Cross-instance registration in RAC occurs when an instance's process monitor (PMON) registers with the local listener, and with all other listeners. Thus, all instances in the cluster database register with all listeners that run on nodes that run instances of the cluster database. This enables all listeners to manage connections across all instances for both load balancing and failover.

Cross-instance registration requires configuring the LOCAL_LISTENER and REMOTE_LISTENER initialization parameters. The LOCAL_LISTENER parameter identifies the local listener, and the REMOTE_LISTENER parameter identifies the global list of listeners. The REMOTE_LISTENER parameter is dynamic. Oracle changes the setting for REMOTE_LISTENER dynamically when you reconfigure your cluster database, for example, when you add or delete instances.

By default, DBCA configures your environment with dedicated servers. However, if you select the Shared server option when using DBCA, then Oracle configures the shared server. In this case, Oracle Database uses both dedicated and shared server processing. When shared servers are configured, the DISPATCHERS parameter is specified as in the following example:

DISPATCHERS="(protocol=tcp)"

If the DISPATCHERS initialization parameter does not specify the LISTENER attribute as in the previous example, then the PMON process registers information for all dispatchers with the listeners specified by the LOCAL_LISTENER and REMOTE_LISTENER parameters.

However, when the LISTENER attribute is specified, the PMON process registers dispatcher information with the listeners specified by the LISTENER attribute. In this case, setting the LISTENER attribute overrides REMOTE_LISTENER settings for the specified dispatchers as in the following example:

DISPATCHERS="(protocol=tcp)(listener=listeners_db_name)"

See Also:

Oracle Database Net Services Administrator's Guide for further information about cross instance registration, shared and dedicated server configurations, and connection load balancing

9.8 Configuring the Listener File (listener.ora)

You can configure two types of listeners in the listener.ora file as described in the following sections:

9.8.1 Local Listeners

If you configured the dedicated server mode using the DBCA Connection Mode tab on the Initialization Parameters page, then DBCA automatically configures the LOCAL_LISTENER parameter when the listener uses a nondefault address port.

If you configured the dedicated server mode by setting the REMOTE_LISTENER initialization parameter, then you must also configure the instance-specific LOCAL_LISTENER initialization parameter.

For example, to configure the LOCAL_LISTENER parameter, add the following entry to the initialization parameter file, where listener_sid is resolved to a listener address through either a tnsnames.ora file or through the Oracle Names Server:

sid.local_listener=listener_sid

The following entry should be in your tnsnames.ora file:

listener_sid=(address=(protocol=tcp)(host=node1-vip)(port=1522))

9.8.2 Multiple Listeners

If DBCA detects more than one listener on the node, it displays a list of the listeners. You can select one or all of these listeners with which to register your database.

9.8.3 How Oracle Database Uses the Listener (listener.ora File)

Services coordinate their sessions using listener file entries by running a process on the server that receives connection requests on behalf of a client application. Listeners are configured to respond to connection requests sent to protocol addresses for a database service or non-database service.

Protocol addresses are configured in the listener configuration file, listener.ora, for a database service or a non-database service. Clients configured with the same addresses can connect to a service through the listener.

During a preconfigured database configuration installation, Oracle Net Configuration Assistant creates and starts a default listener called LISTENER_NODENAME. The listener is configured with default protocol listening addresses for the database and external procedures. The advanced installation process prompts you to create at least one listener with Oracle Net Configuration Assistant. The listener is configured to respond to connection requests that are directed to one protocol address you specify, as well as an address for external procedures.

Both installation modes configure service information about the RAC database and external procedures. An Oracle Database 10g Release 2 (10.2) database service automatically registers its information with the listener, such as its service name, instance names, and load information.

This feature, called service registration, does not require configuration in the listener.ora file. After listener creation, Oracle Net Configuration Assistant starts the listener. The following is an example listener.ora file with an entry for an instance named node1:

listener_node1= 
  (description= 
    (address=(protocol=ipc)(key=extproc))
    (address=(protocol=tcp)(host=node1-vip)(port=1521)(IP=FIRST))
    (address=(protocol=tcp)(host=node1-ip)(port=1521)(IP=FIRST)))
sid_list_listener_node1= 
  (sid_list= 
    (sid_desc= 
      (sid_name=plsextproc) 
      (oracle_home=/private/system/db) 
      (program=extproc)))

9.8.3.1 Listener Registration and PMON Discovery

When a listener starts after the Oracle instance starts, and the listener is listed for service registration, registration does not occur until the next time the Oracle Database process monitor (PMON) discovery routine starts. By default, PMON discovery occurs every 60 seconds.

To override the 60-second delay, use the SQL ALTER SYSTEM REGISTER statement. This statement forces the PMON process to register the service immediately.

Oracle recommends that you create a script to run this statement immediately after starting the listener. If you run this statement while the listener is up and the instance is already registered, or while the listener is down, then the statement has no effect.

See Also:

Oracle Database Net Services Administrator's Guide for further information about the listener and the listener.ora file

9.9 Directory Server Access (ldap.ora File)

If you configure access to a Lightweight Directory Access Protocol (LDAP)-compliant directory server with Oracle Net Configuration Assistant during a Custom Install or Advanced database configuration, an ldap.ora file is created. The ldap.ora file contains the following types of information:

9.10 Net Service Names (tnsnames.ora File)

A tnsnames.ora file is created on each node with net service names. A connect identifier is an identifier that maps to a connect descriptor. A connect descriptor contains the following information:

DBCA creates net service names for connections as shown in Table 9-2.

Table 9-2 Connections for Net Service Names

Net Service Name Type Description

Database connections

Clients that connect to any instance of the database use the net service name entry for the database. This entry also enables Oracle Enterprise Manager to discover a RAC database.

A listener address is configured for each node that runs an instance of the database. The LOAD_BALANCE option causes Oracle to choose the address randomly. If the chosen address fails, then the FAILOVER option causes the connection request to fail over to the next address. Thus, if an instance fails, then clients can still connect using another instance.

In the following example, db.us.oracle.com is used by the client to connect to the target database, db.us.oracle.com.

db.us.acme.com= 
 (description= 
  (load_balance=on)
   (address=(protocol=tcp)(host=node1-vip)(port=1521)
   (address=(protocol=tcp)(host=node2-vip)(port=1521) 
  (connect_data=
     (service_name=db.us.acme.com)))

Note: FAILOVER=ON is set by default for a list of addresses. Thus, you do not need to explicitly specify the FAILOVER=ON parameter.

When you set DB_UNIQUE_NAME by entering a global database name that is longer than 8 characters, excluding DB_DOMAIN, then a net service entry similar to the following is created:

mydatabase.us.acme.com=
  (description =
     (address = (protocol = tcp)(host = node1-vip)(port = 1521))
     (address = (protocol = tcp)(host = node2-vip)(port = 1521))
  (load_balance = yes)
     (connect_data =
   (server = dedicated)
   (service_name = mydatabase.us.acme.com)
   )
   )

Instance connections

Clients that connect to a particular instance of the database use the net service name entry for the instance. This entry, for example, enables Oracle Enterprise Manager to discover the instances in the cluster. These entries are also used to start and stop instances.

In the following example, Oracle Enterprise Manager uses db1.us.acme.com to connect to an instance named db1 on db1-server:

db1.us.acme.com=
 (description= 
  (address=(protocol=tcp)(host=node1-vip)(port=1521))
  (connect_data= 
    (service_name=db.us.acme.com)
    (instance_name=db1)))

Remote listeners

As discussed in "Configuring Service Registration-Related Parameters in Real Application Clusters", the REMOTE_LISTENER parameter identifies the global list of listeners and it is dynamic. Oracle Database changes the setting for REMOTE_LISTENER when you reconfigure your cluster database.

Whether using shared servers or dedicated servers, the list of remote listeners is supplied using the REMOTE_LISTENER parameter. For example:

REMOTE_LISTENER=listeners_db_unique_name

This enables the instance to register with remote listeners on the other nodes; listeners_db_unique_name is resolved through a naming method such as a tnsnames.ora file.

In the following example, listeners_db.us.acme.com is resolved to a list of listeners available on the nodes on which the cluster database has instances:

listeners_db.us.acme.com= 
(address_list=
   (address=(protocol=tcp)(host=node1-vip)(port=1521))
   (address=(protocol=tcp)(host=node2-vip)(port=1521)))

The instance uses this list to determine the addresses of the remote listeners with which to register its information.

Nondefault listeners

As discussed in "Local Listeners" and "Multiple Listeners", the LOCAL_LISTENER parameter is set in the initsid.ora file if a nondefault listener is configured, for example:

sid.local_listener=listener_sid

The variable listener_sid is resolved to a listener address through a naming method such as a tnsnames.ora file.

In the following example, listener_db1.us.acme.com is resolved to the nondefault listener address:

listener_db1.us.acme.com= 
   (address=(protocol=tcp)(host=node1-vip)(port=1522))

Services Entries

When you configure high availability services using the DBCA Services page, then DBCA creates net service entries similar to the following. The three services in the following examples, db_svc1, db_svc2, and db_svc3, have TAF policies of NONE, BASIC and PRECONNECT respectively.

db_svc1.us.acme.com= 
  (description = 
    (address=(protocol=tcp)(host=node1-vip)(port=1521)) 
    (address=(protocol=tcp)(host=node2-vip)(port=1521))
    (load_balance=yes) 
    (connect_data=
        (server = dedicated) 
        (service_name = db_svc1.us.acme.com) 
  )
  )

db_svc2.us.acme.com= 
  (description=
    (address=(protocol=tcp)(host=node1-vip)(port=1521)) 
    (address=(protocol=tcp)(host=node2-vip)(port=1521)) 
    (load_balance=yes) 
    (connect_data =
        (server = dedicated)
        (service_name=db_svc2.us.acme.com)
        (failover_mode =
        (type=select)
        (method=basic)
           (retries=180)
           (delay=5)
     )
     )
     )

db_svc3.us.acme.com=
    (description=
      (address=(protocol=tcp)(host=node1-vip)(port=1521))
      (address=(protocol=tcp)(host=node2-vip)(port=1521))
      (load_balance=yes)
      (connect_data=
        (server=dedicated)
        (service_name=db_svc3.us.acme.com)
        (failover_mode=
        (backup=db_svc3_preconnect.us.acme.com)
        (type=select)
        (method=preconnect)
        (retries=180)
        (delay=5)
   )
   )
   )

Services Entries (continued)

When a service has a TAF policy of PRECONNECT, then a service_name_preconnect net service entry is also created as in the following example:

db_svc3_preconnect.us.acme.com =
  (description =
    (address = (protocol = tcp)(host = node1-vip)(port = 1521))
    (address = (protocol = tcp)(host = node2-vip)(port = 1521))
    (load_balance = yes)
    (connect_data =
      (server = dedicated)
      (service_name = db_svc3_preconnect.us.amce.com)
      (failover_mode =
        (backup = db_svc3.us.acme.com)
        (type = select)
        (method = basic)
        (retries = 180)
        (delay = 5)
      )
    )
  )

External procedures

The following is an entry for connections to external procedures. This entry enables Oracle Database to connect to external procedures.

extproc_connection_data.us.acme.com= 
 (description= 
  (address_list= 
    (address=(protocol=ipc)(key=extproc0))
  (connect_data= 
    (sid=plsextproc)))

Example 9-1 Example tnsnames.ora File

This is an example of a tnsnames.ora file that is created during a preconfigured database configuration installation.

db.us.acme.com= 
 (description= 
  (load_balance=on)
   (address=(protocol=tcp)(host=node1-vip)(port=1521))
   (address=(protocol=tcp)(host=node2-vip)(port=1521))
  (connect_data=
     (service_name=db.us.acme.com)))

db1.us.acme.com=
 (description=
  (address=(protocol=tcp)(host=node1-vip)(port=1521))
  (connect_data= 
    (service_name=db.us.acme.com)
    (instance_name=db1)))

db2.us.acme.com= 
 (description= 
  (address=(protocol=tcp)(host=node2-vip)(port=1521))
  (connect_data= 
    (service_name=db.us.acme.com)
    (instance_name=db2)))

listeners_db.us.acme.com= 
(address_list=
   (address=(protocol=tcp)(host=node1-vip)(port=1521))
   (address=(protocol=tcp)(host=node2-vip)(port=1521)))

extproc_connection_data.us.acme.com= 
 (description=
  (address_list=
    (address=(protocol=ipc)(key=extproc)))
  (connect_data=
    (sid=plsextproc)
    (presentation=RO)))

See Also:

Oracle Database Net Services Administrator's Guide for further information about the tnsnames.ora file

9.11 Net Services Profile (sqlnet.ora File)

Oracle Universal Installer starts Oracle Net Configuration Assistant after the database is installed, and creates the Net Services profile, or sqlnet.ora file.

By default, the sqlnet.ora file is located in the following directory:

$ORACLE_HOME/network/admin

In this directory, in addition to the default sqlnet.ora file generated during installation, you also can find a sample sqlnet.ora file in the directory sample.

During installation, Oracle Net Configuration Assistant creates the following entries in the sqlnet.ora file:

NAMES.DIRECTORY_PATH=(TNSNAMES, EZCONNECT)

The parameter NAMES.DIRECTORY_PATH specifies the priority order of the naming methods to use to resolve connect identifiers to connect descriptors.

The order of naming methods is as follows: directory naming (for Custom Install or Advanced database configuration options only), tnsnames.ora file, Easy Connect, and host naming.

The Easy Connect naming method eliminates the need for service name lookup in the tnsnames.ora files for TCP/IP environments. With Easy Connect, clients use a connect string for a simple TCP/IP address, consisting of a host name and optional port and service name. If you use this method, then no naming or directory system is required.

See Also:

Oracle Database Net Services Administrator's Guide for further information about the sqlnet.ora file