Skip Headers
Oracle® Database Client Quick Installation Guide
10g Release 2 (10.2) for Linux x86

Part Number B15663-02
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Master Index
Master Index
Go to Feedback page
Contact Us

  View PDF

Oracle® Database

Client Quick Installation Guide

10g Release 2 (10.2) for Linux x86

B15663-02

November 2005

This guide describes how to quickly install Oracle Database Client on Linux x86 systems. It includes information about the following:

  1. Reviewing Information About this Guide

  2. Logging In to the System as root

  3. Checking the Hardware Requirements

  4. Checking the Software Requirements

  5. Creating Required Operating System Group and User

  6. Creating an Oracle Base Directory

  7. Configuring the oracle User's Environment

  8. Mounting the Product Disc

  9. Installing Oracle Database Client

  10. What to Do Next?

  11. Documentation Accessibility

1 Reviewing Information About this Guide

This guide describes how to complete a default installation of Oracle Database Client on a system that does not have any Oracle software installed on it. It describes how to install one of the following installation types:

See Also:

Oracle Call Interface Programmer's Guide for more information about Instant Client

This guide does not describe how to install the Custom installation type.

Where to Get Additional Installation Information

For more detailed information about installing Oracle Database Client, refer to Oracle Database Client Installation Guide for Linux x86.

This guide is available on the product disc. To access it, use a Web browser to open the welcome.htm file located in the top-level directory of the installation media, and then select the Documentation tab.

2 Logging In to the System as root

Before you install Oracle Database Client, you must complete several tasks as the root user. To log in as the root user, complete one of the following procedures:

Note:

You must install the software from an X Window System workstation, an X terminal, or a PC or other system with X server software installed.

3 Checking the Hardware Requirements

The system must meet the following minimum hardware requirements:

To ensure that the system meets these requirements:

  1. To determine the physical RAM size, enter the following command:

    # grep MemTotal /proc/meminfo
    
    

    If the size of the physical RAM installed in the system is less than the specified value, then you must install more memory before continuing.

  2. To determine the size of the configured swap space, enter the following command:

    # grep SwapTotal /proc/meminfo
    
    

    If necessary, refer to your operating system documentation for information about how to configure additional swap space.

  3. To determine the amount of free disk space available in the /tmp directory, enter the following command:

    # df -k /tmp
    
    

    If there is less than 400 MB of disk space available in the /tmp directory, then complete one of the following steps:

    • Delete unnecessary files from the /tmp directory to meet the disk space requirement.

    • Set the TMP and TMPDIR environment variables when setting the oracle user's environment (described later).

    • Extend the file system that contains the /tmp directory. If necessary, contact your system administrator for information about extending file systems.

  4. To determine the amount of free disk space available on the system, enter the following command:

    # df -k
    
    

    This command displays the disk space usage on all mounted file systems. You must identify a file system with sufficient disk space.

  5. To determine whether the system architecture can run the software, enter the following command:

    # grep "model name" /proc/cpuinfo
    
    

    This command displays the processor type. Verify that the processor architecture matches the Oracle software release that you want to install. If you do not see the expected output, then you cannot install the software on this system.

4 Checking the Software Requirements

The system must meet the following minimum software requirements.

Item Requirement
Operating system One of the following operating system versions:
  • Red Hat Enterprise Linux AS/ES 3.0 (Update 4 or later)

  • Red Hat Linux 4.0

  • SUSE Linux Enterprise Server 9.0 with SP2 or later

  • Asianux 1.0

  • Asianux 2.0

Kernel version The system must be running the following kernel version (or a later version):

Red Hat Enterprise Linux 3.0 and Asianux 1.0:

2.4.21-27.EL

Note: This is the default kernel version.

Red Hat Enterprise Linux 4.0 and Asianux 2.0:

2.6.9-5.EL

SUSE Linux Enterprise Server 9.0:

2.6.5-7.201

Packages The following packages (or later versions) must be installed:

Red Hat Enterprise Linux 3.0 and Asianux 1.0:

make-3.79.1
gcc-3.2.3-34
glibc-2.3.2-95.20
compat-db-4.0.14-5
compat-gcc-7.3-2.96.128
compat-gcc-c++-7.3-2.96.128
compat-libstdc++-7.3-2.96.128
compat-libstdc++-devel-7.3-2.96.128
openmotif21-2.1.30-8
setarch-1.3-1

Red Hat Enterprise Linux 4.0 and Asianux 2.0:

binutils-2.15.92.0.2-13.EL4
compat-db-4.1.25-9
compat-libstdc++-296-2.96-132.7.2
control-center-2.8.0-12
gcc-3.4.3-22.1.EL4
gcc-c++-3.4.3-22.1.EL44
glibc-2.3.4-2.9
glibc-common-2.3.4-2.9
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-22.1
libstdc++-devel-3.4.3-22.1
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
setarch-1.6-1

SUSE Linux Enterprise Server 9:

binutils-2.15.90.0.1.1-32.5
gcc-3.3.3-43.24
gcc-c++-3.3.3-43.24
glibc-2.3.3-98.28
gnome-libs-1.4.1.7-671.1
libstdc++-3.3.3-43.24
libstdc++-devel-3.3.3-43.24
make-3.80-184.1
pdksh-5.2.14-780.1
sysstat-5.0.1-35.1
xscreensaver-4.16-2.6
Oracle Messaging Gateway Oracle Messaging Gateway supports the integration of Oracle Streams Advanced Queuing (AQ) with the following software:
  • IBM WebSphere MQ V5.3, client and server, with corrective service diskette 5 (CSD05) or later:

    MQSeriesClient
    MQSeriesServer
    MQSeriesRuntime
    
  • TIBCO Rendezvous 7.2

PL/SQL native compilation, Pro*C/C++, Oracle Call Interface, Oracle C++ Call Interface, Oracle XML Developer's Kit (XDK) The version of GNU C and C++ compilers listed earlier for your distribution is supported for use with these products.

Notes: Intel C++ Compiler v7.1.0.28 or later is also supported. However, it is not required for installation. On Red Hat Enterprise Linux 3, OCCI is supported with both version 2.96-128 and version 3.2 of the GNU C++ compiler. However, version 3.2 is the default compiler version. OCCI is also supported with Intel Compiler v8.0 with gcc 3.2.3 standard template libraries. Intel C++ Compiler v7 does not support OCCI.

Oracle JDBC/OCI Drivers You can use the following optional JDK version with the Oracle JDBC/OCI drivers, however it is not required for the installation:

Sun JDK 1.4.2 with the JNDI extension

Oracle ODBC Drivers You should install ODBC Driver Manager for UNIX. You can download and install the Driver Manager from the following URL:

http://www.unixodbc.org


To ensure that the system meets these requirements:

  1. To determine which version of the operating system is installed, enter the following command:

    # cat /etc/issue
    

    Note:

    Only the distributions and versions listed earlier in this section are supported. Do not install the software on other versions of Linux.
  2. To determine whether the required kernel is installed, enter the following command:

    # uname -r
    
    

    On a Red Hat Enterprise Linux 3.0 system, the output may be as follows:

    2.4.21-27.EL
    
    

    In this example, the output shows the kernel version (2.4.21) and errata level (27.EL). If the errata level is less than 27, then install the latest kernel update. Kernel updates are available from the Red Hat Network.

    On a SUSE Linux Enterprise Server 9 system, the output may be as follows:

    2.6.5-7.97
    
    

    In this example, the output shows the kernel version on the system. If the kernel version is less than 2.6.5-7.97, then contact SUSE for information about obtaining and installing the kernel updates.

  3. To determine whether the required packages are installed, enter commands similar to the following:

    # rpm -q package_name
    
    

    If a package is not installed, or if the version is lower than the required version, then install it from your Linux distribution media or download the required package from your Linux vendor's Web site.

5 Creating Required Operating System Group and User

The following local operating system group and user must exist on the system:

To determine if this group and user already exist, and if required, to create them, follow these steps:

  1. To determine if the oinstall group exists, enter the following command:

    # more /etc/oraInst.loc
    
    

    If the output of this command shows the oinstall group name, then the group already exists.

    If the oraInst.loc file exists, then the output from this command is similar to the following:

    inventory_loc=/u01/app/oracle/oraInventory
    inst_group=oinstall
    
    

    The inst_group parameter shows the name of the Oracle Inventory group (oinstall).

  2. If necessary, enter the following command to create the oinstall group:

    # /usr/sbin/groupadd oinstall
    
    
  3. To determine whether the oracle user exists and belongs to the correct groups, enter the following command:

    # id oracle
    
    

    If the oracle user exists, then this command displays information about the groups to which the user belongs. The output should be similar to the following, indicating that oinstall is the primary group:

    uid=440(oracle) gid=200(oinstall) groups=201(dba),202(oper)
    
    
  4. If necessary, complete one of the following actions:

    • If the oracle user exists, but its primary group is not oinstall, then enter a command similar to the following, where the -g option specifies oinstall as the primary group and the -G option specifies any existing groups to which the oracle user belongs:

      # /usr/sbin/usermod -g oinstall [-G dba] oracle
      
      
    • If the oracle user does not exist, then enter the following command to create it:

      # /usr/sbin/useradd -g oinstall [-G dba] oracle
      
      

      This command creates the oracle user and specifies:

      • oinstall as the primary group

      • dba as an optional secondary group

  5. Enter the following command to set the password of the oracle user:

    # passwd oracle
    

6 Creating an Oracle Base Directory

Note:

You need not perform this procedure if an Oracle base directory already exists on the system. If you determine that the oinstall group exists, then, typically, the Oracle base directory is the parent directory of the Oracle Inventory directory.

To create the Oracle base directory:

  1. Enter the following command to display information about all mounted file systems:

    # df -h
    
    

    This command displays information about all the file systems mounted on the system, including:

    • The physical device name

    • The total amount, used amount, and available amount of disk space

    • The mount point directory for that file system

  2. From the display, identify either one or two file systems that meet the disk space requirements mentioned earlier in this section.

  3. Note the name of the mount point directory for each file system that you identified.

  4. Enter commands similar to the following to create the recommended subdirectories in the mount point directory that you identified and set the appropriate owner, group, and permissions on them:

    # mkdir -p /mount_point/app/oracle_sw_owner
    # chown -R oracle:oinstall /mount_point/app/oracle_sw_owner
    # chmod -R 775 /mount_point/app/oracle_sw_owner
    
    

    For example, if the mount point you identify is /u01 and oracle is the user name of the Oracle software owner, then the recommended Oracle base directory path is as follows:

    /u01/app/oracle
    

7 Configuring the oracle User's Environment

You run Oracle Universal Installer from the oracle account. However, before you start Oracle Universal Installer, you must configure the environment of the oracle user. To configure the environment, you must:

To set the oracle user's environment:

  1. Start a new terminal session, for example, an X terminal (xterm).

  2. Enter the following command to ensure that X Window applications can display on this system:

    $ xhost fully_qualified_remote_host_name
    
    
  3. Complete one of the following steps:

    • If the terminal session is not connected to the system where you want to install the software, then log in to that system as the oracle user.

    • If the terminal session is connected to the system where you want to install the software, then switch user to oracle:

      $ su - oracle
      
      
  4. To determine the default shell for the oracle user, enter the following command:

    $ echo $SHELL
    
    
  5. Open the oracle user's shell startup file in any text editor:

    • Bash shell (bash) on Red Hat:

      $ vi .bash_profile
      
      
    • Bourne shell (sh), Bash shell on SUSE (bash), or Korn shell (ksh):

      $ vi .profile
      
      
    • C shell (csh or tcsh):

      % vi .login
      
      
  6. Enter or edit the following line in the shell startup file, specifying a value of 022 for the default file mode creation mask:

    umask 022
    
    
  7. If the ORACLE_SID, ORACLE_HOME, or ORACLE_BASE environment variable is set in the file, then remove the corresponding lines from the file.

  8. Save the file, and exit from the editor.

  9. To run the shell startup script, enter the following command:

    • Bash shell on Red Hat:

      $ . ./.bash_profile
      
      
    • Bourne shell, Bash shell on SUSE, or Korn shell:

      $ . ./.profile
      
      
    • C shell:

      % source ./.login
      
      
  10. If you are not installing the software on the local system, then enter a command similar to the following to direct X applications to display on the local system:

    • Bourne, Bash, or Korn shell:

      $ DISPLAY=local_host:0.0 ; export DISPLAY
      
      
    • C shell:

      % setenv DISPLAY local_host:0.0
      
      

    In this example, local_host is the host name or IP address of the system that you want to use to display Oracle Universal Installer (your workstation or PC).

  11. If you determined that the /tmp directory had insufficient free disk space when checking the hardware requirements, then identify a file system with the required amount of free space and set the TMP and TMPDIR environment variables as follows:

    1. Use the df -h command to identify a suitable file system with sufficient free space.

    2. If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory:

      $ su - root
      # mkdir /mount_point/tmp
      # chmod a+wr /mount_point/tmp
      # exit
      
      
    3. Enter commands similar to the following to set the TMP and TMPDIR environment variables:

      Bourne, Bash, or Korn shell:

      $ TMP=/mount_point/tmp
      $ TMPDIR=/mount_point/tmp
      $ export TMP TMPDIR
      
      

      C shell:

      % setenv TMP /mount_point/tmp
      % setenv TMPDIR /mount_point/tmp
      
      
  12. Enter the following commands to ensure that the ORACLE_HOME and TNS_ADMIN environment variables are not set:

    Bourne, Bash, or Korn shell:

    $ unset ORACLE_HOME
    $ unset TNS_ADMIN
    
    

    C shell:

    % unsetenv ORACLE_HOME
    % unsetenv TNS_ADMIN
    
    
  13. To verify that the environment has been set correctly, enter the following commands:

    $ umask
    $ env | more
    
    

    Verify that the umask command displays a value of 22, 022, or 0022 and the environment variables that you set in this section have the correct values.

8 Mounting the Product Disc

On most Linux systems, the product disc mounts automatically when you insert it into the drive. If the disc does not mount automatically, then follow these steps to mount it:

  1. Switch user to root:

    $ su - root
    
    
  2. If necessary, enter a command similar to the following to eject the currently mounted disc, then remove it from the drive:

    • Red Hat:

      # eject /mnt/dvd
      
      
    • SUSE:

      # eject /media/dvd
      
      

    In these examples, /mnt/dvd and /media/dvd are the mount point directories for the disc drive.

  3. Insert the disc into the disc drive.

  4. To verify that the disc mounted automatically, enter a command similar to the following:

    • Red Hat:

      $ ls /mnt/dvd
      
      
    • SUSE:

      $ ls /media/dvd
      
      
  5. If this command fails to display the contents of the disc, then enter a command similar to the following:

    • Red Hat:

      # mount -t iso9660 /dev/dvd /mnt/dvd
      
      
    • SUSE:

      # mount -t iso9660 /dev/dvd /media/dvd
      
      

    In these examples, /mnt/dvd and /media/dvd are the mount point directories for the disc drive.

9 Installing Oracle Database Client

After configuring the oracle user's environment, start Oracle Universal Installer and install the Oracle software as follows:

  1. To start Oracle Universal Installer, enter the following command:

    $ /mount_point/client/runInstaller
    
    

    If Oracle Universal Installer does not start, then refer to Oracle Database Installation Guide for Linux x86 for information about how to troubleshoot X display problems.

  2. The following table describes the recommended action for each Oracle Universal Installer screen. Use the following guidelines to complete the installation:

    • If you need more assistance, or if you want to choose an option that is not a default, then click Help for additional information.

    • If you encounter errors while installing or linking the software, then refer to Oracle Database Client Installation Guide for Linux x86 for information about troubleshooting.

    Note:

    If you have completed the tasks listed previously, then you can complete the installation by choosing the default values on most screens.
    Screen Recommended Action
    Welcome Click Next.
    Select Installation Type Select InstantClient, Administrator, or Runtime. Then, click Next.
    Specify Home Details Specify the name and directory path of the Oracle home.
    Product-Specific Prerequisite Checks Verify that all of the prerequisite checks have succeeded, and then click Next.

    Oracle Universal Installer checks the system to verify that it is configured correctly to run Oracle software. If you have completed all of the preinstallation steps in this guide, then all of the checks should pass.

    If a check fails, then review the cause of the failure listed for that check on the screen. If possible, rectify the problem and rerun the check. Alternatively, if you are satisfied that your system meets the requirements, then you can select the check box for the failed check to manually verify the requirement.

    Summary Review the information displayed on this screen, and then click Install.
    Install This screen displays status information while the product is being installed.
    Configuration Assistants This screen is displayed only if you select Administrator or Runtime on the Select Installation type screen.

    This screen displays status information for the Oracle Net Configuration Assistant that configures Oracle Net. When the message is displayed at the end of this process, click OK to continue.

    Oracle Net Configuration Assistant: Welcome This screen is displayed only if you select Administrator or Runtime on the Select Installation Type screen.

    Review the information on this screen, and then click Next.

    The Oracle Net Configuration Assistant configures the easy connect naming method. For more information about this naming method, click Help.

    Oracle Net Configuration Assistant: Done Click Finish to continue.
    Execute Configuration Scripts When prompted, read the instructions and then run the script mentioned on this screen. Click OK to continue.
    End of Installation To exit from Oracle Universal Installer, click Exit, and then click Yes.

10 What to Do Next?

After you have successfully installed Oracle Database Client, refer to Oracle Database Client Installation Guide for Linux x86 for information about required and optional postinstallation steps.

11 Documentation Accessibility

Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For more information, visit the Oracle Accessibility Program Web site at

http://www.oracle.com/accessibility/

Accessibility of Code Examples in Documentation

Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.

Accessibility of Links to External Web Sites in Documentation

This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.

TTY Access to Oracle Support Services

Oracle provides dedicated Text Telephone (TTY) access to Oracle Support Services within the United States of America 24 hours a day, seven days a week. For TTY support, call 800.446.2398.


Oracle Database Client Quick Installation Guide, 10g Release 2 (10.2) for Linux x86

B15663-02

Copyright © 2005, Oracle. All rights reserved.

The Programs (which include both the software and documentation) contain proprietary information; they are provided under a license agreement containing restrictions on use and disclosure and are also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering, disassembly, or decompilation of the Programs, except to the extent required to obtain interoperability with other independently created software or as specified by law, is prohibited.

The information contained in this document is subject to change without notice. If you find any problems in the documentation, please report them to us in writing. This document is not warranted to be error-free. Except as may be expressly permitted in your license agreement for these Programs, no part of these Programs may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose.

If the Programs are delivered to the United States Government or anyone licensing or using the Programs on behalf of the United States Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the Programs, including documentation and technical data, shall be subject to the licensing restrictions set forth in the applicable Oracle license agreement, and, to the extent applicable, the additional rights set forth in FAR 52.227-19, Commercial Computer Software—Restricted Rights (June 1987). Oracle Corporation, 500 Oracle Parkway, Redwood City, CA 94065

The Programs are not intended for use in any nuclear, aviation, mass transit, medical, or other inherently dangerous applications. It shall be the licensee's responsibility to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of such applications if the Programs are used for such purposes, and we disclaim liability for any damages caused by such use of the Programs.

Oracle, JD Edwards, PeopleSoft, and Retek are registered trademarks of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

The Programs may provide links to Web sites and access to content, products, and services from third parties. Oracle is not responsible for the availability of, or any content provided on, third-party Web sites. You bear all risks associated with the use of such content. If you choose to purchase any products or services from a third party, the relationship is directly between you and the third party. Oracle is not responsible for: (a) the quality of third-party products or services; or (b) fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations related to purchased products or services. Oracle is not responsible for any loss or damage of any sort that you may incur from dealing with any third party.